Profession Alternatives at KOHASA Engineering Firm Restricted

Sharing is caring!

KOHASA Engineering Firm Restricted is an entirely indigenous onshore and offshore Oil & Fuel Manufacturing Services Design and Building firm with an enormous reservoir of expertise in numerous fields of engineering.

We’re recruiting to fill the positions beneath:

 

Job Title: Reliability and Upkeep Specialist

Location: Nigeria

Job Description / Tasks

  • The Specialist will develop and lead reliability enchancment processes by working carefully with Shoppers Venture Administration
  • Group in addition to their Operations & Upkeep Group.

As well as, the candidate will:

  • Establish and consider danger and reliability enchancment alternatives by assessments of plant and related information.
  • Set up reliability fashions in all phases of engineering (pre-FEED to DED) and on working amenities.
  • Lead cross self-discipline evaluation groups, together with teaching and mentoring in reliability values and strategies.
  • Make the most of reliability evaluation instruments to determine priorities and focus the group on essentially the most important enchancment alternatives.
  • Work carefully with Venture Groups to construct reliability and maintainability into the ability design.
  • Develop procedures in keeping with gear criticality and to adjust to laws and firm requirements.

Instructional and

  • Bachelor’s Diploma in Engineering, Registered Skilled Engineer (or non-USA equal)
  • Years of Work Expertise required: Minimal of eight years demonstrable expertise within the reliability setting, ideally within the Oil and Fuel Trade with good data of all danger evaluation strategies together with RAM, QRA, FTA, FMEA and SIL.
  • Age: 35-40 years.

 

 

 

 

Job Title: Lead, Course of Engineering

Location: Nigeria

Job Description / Tasks

  • Plans, schedules, and supervises course of design and or programs work for onshore and offshore oil and gasoline amenities tasks.
  • Opinions scopes of labor, budgets, commitments, schedules and progress. Makes use of progress reporting system.
  • The diploma of help and supervision is dependent upon scope , part and progress of mission
  • Evaluate and administration of mission and common specs, engineering procedures and engineering coverage.
  • Candidates should contribute effectively to the every kind of course of associated actions associated to grease and gasoline actions for tasks, research, proposals, estimates and / or work enchancment packages. The Lead Course of Engineer might be liable for mission execution inside finances and time schedules, administration and main different engineers, and should be capable to work independently
  • Nevertheless complicated issues could also be mentioned with a Course of Specialist within the division.

The Lead Course of Engineer should carry out and might be held liable for and conscious of:

  • Scheduling and estimating actions
  • Establishing the definition of foundation of design and design standards.
  • Seek the advice of specialists of the Course of Expertise Division and elsewhere , if relevant.
  • Carry out feasibility, various analysis and course of planning research
  • Position and sensitivity of course of working pressures and temperature, stream evaluation and properties
  • Choice of course of schemes and course of working philosophy.
  • Preparation and upkeep of course of movement diagrams together with warmth and materials balances
  • Preparation and upkeep of course of information.
  • Preparation and upkeep of mechanical design circumstances for giant course of vegetation.
  • Preparation of course of and mechanical design specs of kit, traces and instrumentation.
  • Preparation and upkeep of piping and instrument diagrams. Lead in screening conferences and communication with different
  • disciplines to confirm and be sure that course of necessities are will understood and correctly taken cares of by all involved.
  • Preparation and upkeep of hydrostatic check diagrams and safeguarding diagrams.
  • Execution of all course of calculations and simulations.
  • Preparation and upkeep of all security and environmental elements.
  • Preparation and upkeep of plant operation manuals
  • Evaluate of all piping designs which can have an effect on the method integrity.
  • In respect of constructed vegetation is the consultant for all course of associated elements akin to commissioning, start-up and check
  • runs.

Instructional and

  • Bachelor’s Diploma in Chemical or Mechanical Engineering
  • Years of Work Expertise required: 10 years working experiences within the self-discipline, 10 years needs to be engaged on oil discipline, petrochemical, or oil and gasoline dealing with tasks
  • Age: 35-40 years.

 

 

 

Job Title: Main Rotating Gear (Compressor and Generators) Controls, Instrumentation and Automation Specialist

Location: Nigeria

Job Description / Tasks

  • Be in control of Compressors and Fuel Generators controls and Instrumentation.
  • Conduct distant diagnostics and monitoring of kit..
  • Use software program in resolving vibration points.
  • Align and help compressor and Turbine system enchancment packages that can decrease/eradicate deferment.
  • Help and Maintain Compressor and Turbine programs. Implement and maintain Information switch to respective asset workforce personnel.

Instructional and

  • Engineering Diploma within the related self-discipline
  • Years of Work Expertise required: 10 years cognitive expertise
  • Age: 35-40 years.

 

 

 

Job Title: QA / QC and Constructions Integrity Specialist

Location: Nigeria

Job Description / Tasks

  • Guarantee all QA/QC companies throughout the tasks /Asset to make sure that companies are delivered to specified requirements.
  • Maintain common engagement with SPDC PQL on weekly foundation to evaluation final result of all of the QA/QC companies beneath his watch and produce minutes of assembly for signature by SPDC.
  • Plan and direct actions of Facility Statutory Inspectors and On-Plot Piping Inspection Groups, inspection assignments in SQI
  • Plan and organise extra ad-hoc inspection actions as and when required
  • Keep a transparent and environment friendly submitting system of all QA/QC actions
  • Conduct weekly evaluation of experiences in SQI; together with all findings , NCR, Observations and so on.
  • Maintain copies of present calibration certificates for all NDT gear utilized in efficiency of the companies.
  • Coordinate the deployment of key QA/QC companies round SPDC offshore amenities.
  • Outline and develop the mission Built-in High quality Administration System, to realize flawless and defect free supply, in keeping with the necessities of trade and world requirements.
  • Guarantee High quality administration is concentrated on risk-based considering, setting clear necessities and offering high quality insights, based mostly on “Plan-Do-Test-Act” phases
  • Develop and implement mission High quality Self-discipline Supply Plan.
  • Develop High quality intervention packages to handle dangers and alternatives, optimize price and add values
  • Present enter related to high quality dangers and administration actions into PEP.

Instructional and

  • Engineering Diploma and Planning Certification,
  • Years of Work Expertise required: Minimal of eight years working, precommissioning / commissioning expertise in hydrocarbon amenities
  • Age: 35-40 years.

 

 

 

Job Title: Commissioning and Begin-Up Specialist (Instrument, Management & Automation)

Location: Nigeria

Job Description / Tasks

  • Evaluate, advise and monitor the implementation of Integration & communication hyperlinks with a number of DCS & Course of Automation properitarty system.
  • Combine Security Instrumented System with a number of properitory DCS system and platforms in accordance with requirements and statutory necessities. Evaluate and help to develop the Commissioning check protocols masking all Course of
  • Automation system Venture ITPs, masking all key mission actions and work places, Monitor, evaluation and report back to PQL /PL with respect with SATs, FATsWelding Procedures, Shut out of Punchlists Management Loops logic modification and testing High quality associated programmes, Alarm & Limits, Management loop efficiency checks , Audit Schedules and Outcomes, and so on.
  • Coordinate ITP Inspection , FAT and SAT at actions at numerous websites and distributors, evaluation and remark and help to implement the design management system logic.

Instructional and

  • B. Eng / B.Sc in related Engineering self-discipline
  • Years of Work Expertise required: Minimal of 10 years working, precommissioning/ commissioning expertise in hydrocarbon amenities
  • Age: 35-40 years.

 

 

 

Job Title: Commissioning & Begin-Up Specialist (Course of / Mechanical)

Location: Nigeria

Job Description / Tasks

  • Overseeing completion of multi-discipline division of labor associated to pre-commissioning or commissioning on tasks.
  • Supporting and supervision of the commissioning workforce on tasks.
  • Offers multi-discipline enter into the scheduling, designing and planning of tasks. As well as, the Commissioning Lead additionally develops multi-discipline commissioning technique paperwork for tasks.
  • Evaluate, approve and overseeing the set up and design of minor non permanent commissioning provides and programs.
  • Evaluate and approve all multi-discipline commissioning processes to make sure they’re compliant with the procedures, specs and requirements of the mission.
  • Be certain that all commissioning procedures comply with all acceptable security practices and procedures and take part in all mission and firm security packages.
  • Audit commissioning actions often to make sure compliance with environmental, high quality, and security necessities.
  • Talk with the mission engineering workplace to be able to be sure that the relevant fabrication drawings are created in accordance with all commissioning necessities.

Instructional and

  • Engineering Diploma and Planning Certification, have to be COREN licensed
  • Years of Work Expertise required: Minimal of 10 years working, precommissioning / commissioning expertise
  • Age: 35 – 40 years.

 

 

 

Job Title: Lead, I & CA

Location: Nigeria

Job Description / Tasks

  • The Lead I & CA Engineer shall be liable for the workforce coordination / well timed provision of acceptable Instrumentation inputs in keeping with the varied tasks as outlined within the scope of labor for the particular mission
  • As well as, he shall be capable to develop new approaches to issues, put together or modify drawings, specs, calculations, and monitor work to adjust to relevant codes and requirements.
  • Be capable of use design instruments and software program like AutoCAD, SPI (INtools), InstruCalc to hold out design works and research and put together design experiences (i.e. philosophies, specs & datasheets, research experiences, procedures), calculation sheets/notes, design drawings in addition to conduct website visits to any mission website with out supervision or steerage.

Instructional and

  • Engineering Diploma and Planning Certification, have to be COREN licensed
  • Years of labor expertise required: minimal of 10 years working, precommissioning/ commissioning expertise
  • Age: 35 – 40 years.

 

 

 

Job Title: Principal E3D / PDMS Administrator

Location: Nigeria

Job Description / Tasks

  • Produce / put together 3D Implementation plans in keeping with consumer Specification / necessities.
  • Conversant with ExxonMobil GPs Requirement relating to PMDS/E3D specs / process / necessities for a number of platforms CATS/SPECS/MACRO database arrange.
  • Venture arrange, upkeep and help of the system.
  • The PDMS / E3D administrator will keep all areas of the 3D mannequin setting for stability and upkeep.
  • The Administrator shall make sure the modeling setting works appropriately in regard to the technology, management and distribution of 3D mannequin interfaces.
  • Venture set-up, administration and person help for Aveva PDMS / E3D / E3D.
  • Full and thru data of PDMS / E3D Ver 12.1.zero.14, E3D, Paragon, PML, CATS & SPECS
  • Evaluate total plot plan of the mission & divide the plant to optimum variety of building areas in session.
  • Understands the scope of every mission and has the aptitude to create PDMS / E3D database buildings that can allow the 3D design and subsequent creation of deliverables from the mission databases.
  • Create PDMS / E3D mannequin based mostly on 3D modeling process with the required databases, groups and customers and entry rights
  • in response to PDMS / E3D Administration, Audit & management. (Set up procedures / specs for tasks and firm requirements relating to make use of of PDMS / E3D.)
  • Chargeable for end-user coaching on the utilization of customization.
  • This contains class room / distant coaching and preparation of coaching materials.
  • Work together instantly with customers / self-discipline leads and doc necessities and particular wants associated to mission designs and desires.
  • Coordinate with the designers from the respective engineering disciplines to fulfill the mission deliverables with timeliness and high quality.
  • Troubleshoot and escalate appropriately any technical points and follow-up for fast decision.
  • Venture particular customization of system and writing macros as per mission wants and for additional checking the standard of PDMS / E3D outputs.
  • Comply with established PDMS/E3D requirements, Setup the PDMS/E3D and associated programs, Keep the PDMS/E3D mission, Present route and help to designers
  • Present advert hoc experiences from PDMS/E3D or associated databases
  • Develops staffing schedules to make sure essentially the most advantageous utilization of obtainable gear.
  • Assists in creating plans for and/or software program purchases
  • Coordinates set up of recent programs with person schedules
  • Oversees and supplies technical help for custom-made instruments, utilities and scripts to automate work processes and enhance CAD productiveness and effectivity; oversees and participates in performing day by day upkeep on CAD databases, together with researching and reconciling inconsistencies and variations in information
  • Carry out routine checks on mannequin by information verification and mission auditing.
  • Create required experiences from PDMS/E3D mannequin for Format / Materials teams.
  • Extract MTO from PDMS/E3D mannequin for importing to VPRM or any materials administration system used within the mission.
  • Add specification recordsdata generated by VPRM in PDMS/E3D & test the completeness and correctness of things uploaded in PDMS/E3D.
  • Setup ISODRAFT module for producing isometrics as per mission & consumer specs / paperwork & resolve and hassle shoot isometric errors.
  • Replace mannequin evaluation recordsdata in NAVIS WORKS format on day by day foundation and duplicate them to mission server for the usage of all self-discipline engineers.
  • DESIGN-Gear, Piping, Structural, Entry methods.
  • ISODRAFT-ISODRAFT Customization as per the Necessities, Bolt desk, Backing Sheet.
  • Draft-Administration -Administration & Drafting.
  • Auto Drawing Manufacturing Methodology(ADP)
  • Paragon CATS)-Piping, Metal, Instrument, Catalogue creation & updating
  • SPECON (SPECS)-Piping, Metal, Instrument, Spec creation.& updating
  • LEXICON-UDA creation.
  • PROPCON-Properties Desk Creation.
  • ADMIN- Venture Arrange, Entry Management, Venture Creation, configurations
  • MDS- Multi-Self-discipline Help setup and customization
  • Experiences Customization as per the necessities
  • Customization and creating routine for 3D Mannequin file export and import integration with fabrication detailing software program & Engineering evaluation software program.
  • Creation and preparation Of Macro from PML Appropriate For Any PDMS/E3D Module and PML-2 Object oriented programming.
  • Switch of specification Generated in different to PDMS/E3D & Era of specification from piping specification.
  • Proficient in importing of backing sheet in PGA`s & Isometrics as per mission want.
  • Report Extraction as required with mission go well with.
  • PDMS/E3D suite of software program set up and hassle taking pictures
  • PDMS/E3D mission structure and Databases
  • Properly versed in P&ID`S, different division drawings like gear G.A.D, Hook up and so on.
  • Co-Ordination with different division for technology of Catalogue & conflict free mannequin.
  • Acquainted with pipe helps & CEASER-II software program.
  • Conversant with worldwide codes and requirements akin to ANSI, ASTM, API, ASME and BS.
  • Detailed piping specification, valve specification, specialty gadgets specification, Materials choice/ specialty gadgets creation from primitive on E3D.
  • Supervise and groom Designers.

Instructional and

  • Grasp’s Diploma in Engineering or B.Sc in Engineering, COREN licensed
  • Years of Work Expertise required: minimal of eight years
  • Age: 35 – 40 years.

 

 

 

The best way to Apply
and certified candidates ought to ship their CV to: hr@kohasaeng.com utilizing the Job Title as the topic of the e-mail.

 

Essential Notes

  • The above statements are meant to explain the overall nature and degree of labor to be carried out by individuals assigned to this job.
    They aren’t to be construed as an exhaustive listing of all duties, duties and expertise required of personnel so labeled.
    All personnel could also be required to carry out different duties along with these specified sometimes, as wanted
    • We don’t cost any utility, processing, coaching, interviewing, testing or different charge in reference to the appliance or recruitment course of. Must you obtain a solicitation for the fee of a charge, please disregard it. Moreover, please notice that emblems, logos, names and addresses are simply copied and reproduced. Subsequently, you might be suggested to use specific care when submitting private data on the net
    • We’re an equal alternative employer and worth variety inclusion. We don’t discriminate on grounds of color, race, nationality, faith, age, ethnic origin, incapacity, gender, marital standing, or sexual orientation in our employment practices
    • Our persons are all equally gifted in distinctive methods: we come from various traditions, private experiences and factors of view. And we wish to embody yours, Are you able to encourage us along with your concepts?
    • We encourage all candidates to use and doesn’t observe any discrimination in any recruitment course of.
    • Purposes submitted after the deadline won’t be thought-about.
    • As a result of urgency of the place, we now have the fitting to recruit a candidate who matches the required profile earlier than the above deadline
    • Solely certified candidates might be invited for interview

 

Software Deadline 15th February, 2021